k | @o @l
| Number of Spindle | @1 spindle | |
| Lower spindle |
@Speed | @250 ` 1,000 r.p.m. |
| @Oblique angle | @0` 25 | |
| Upper spindle |
@Speed | @250 ` 1,000 r.p.m |
| @Oscillating frequency | @30 per minute | |
| @Oscillating stroke | @0 ` 120 mm | |
| @Timer | @multi timer | |
| @Moter | @400W breke motor@@8P@@3Σ@@200V@@2pcs. | |
| @100W@@4P@@3Σ@@200V@@1pc. | ||
| @Coolant pump | @ 40W@@2P@@3Σ@@200V@@1pc. | |
| Dimensions | @Machine | @W@830mm@@D@1,150mm@@H1,300mm |
| @Coolant tank | @W@400mm@@D@@740mm@@H@365mm | |
| @Weight | @Machine | @315kg |
| @Coolant tank | @25kg.(excluding abrasive liquid) | |
@@sxis to front at nay selected angle between 0and 25to eliminated dead
@@angle for polishing radius surface and reversing rotation between upper and
@@lower lens dish spindles and also oscillating upper lens dish spindle.@Stable
@@polishing can be obtained with preventing pellet flaw caused by stopping
@@spindle on account of sophsticate designe.
2) The machine is for polishing spherical and flat surface works under 250 mm
@@diameter.
3) Work surface is easy to compensate as upper spindle can be removed during
@@polishing work by the mechanism of upper spindle motion to front and rear.
4) Tommy-bar shall be selected either for spherical or flat surface.@Stocked lens
@@dish can be used.
5) Work pressure is controlled by air and spindle is moved to up and down by foot
@@pedal. Polishing time is set by timer.@Work is pressurized by pushing start
@@button (but while 2 seconds lightly) and released by finishing work cycle.
@@Upper spindle is stopped operation at the interior of machine for handling
@@upper lens dish easily.
6) Abrasive liquid coolant tank with caster is easy to handle.
